Pipe Stuff

Switch View

Order Directly from Shapeways below The flange dia, number and size of bolts means these are all Class 150 pipe The studs fit the ID of Evergreen #229 9/32″ tubing. This is pretty darn close in ...

1:87 24in Gate Valve 4C Ver2
Order Directly from Shapeways below These are 24″ pipe flanges in HO scale. The studs fit the ID of Evergreen #229 9/32″ tubing. This is pretty darn close in scale as the tubing would only ...

1:87 24″ Pipe Flange Ver3 10ea
90° and 45° elbows, couplings and Tees; gate valves. These all have a small stud to fit the ID of a piece of Evergreen #223 tubing. This tubing measures 0.093 in./2,4 mm OD and 0.039 in./0,99 mm ID. ...

c.1:48 – 4″ Pipe Fittings
Order Directly from Shapeways below: This coupling is part of a set of pipe fittings that are designed to connect to Evergreen #224 tubing. This tubing has an Outside Diameter (O.D.) of 0.125″/3 ...

1:48 6″ nominal pipe Flange
Order Directly from Shapeways Below: Made these to fit within constraints as to size – meaning fit within a certain space. The flanges dia, thickness, bolt circle, bolts etc. are all correct for ...

1:25 Fire Truck Piping
Order Directly from Shapeways below This is a collection of my 24 inch pipe fittings. There are two Tees, two 90° elbows, two double-flanges and two gate valves. They represent Class 150 pipe from th ...

1:87 24 inch Pipe Fitting Assortment
These Tees represent a Class 150 pipe from the flange dia and size and number of bolts. The studs fit the ID of Evergreen #229 9/32″ tubing. This is pretty darn close in scale as the tubing w ...

1:87 24 inch Pipe Tee
Order Directly from Shapeways below I had a message from a gentleman who builds 1:50 scale trucks. He needed various piping to connect with 1/8″ tubing. I re-worked the stud that fits into the I ...

1:48 Pipe Fittings (test)
Order Directly from Shapeways below 90° elbows. The flange dia, number and size of bolts means these are Class 150 pipe elbows The studs fit the ID of Evergreen #229 9/32″ tubing. This is prett ...

1:87 24″ Pipe 90° elbows
Order direct from Shapeways below — I scratchbuilt and then 3D printed 6″ Gate Valves for my Pump House. I go into excruciating detail in 6 inch Gate Valve – in that I said – “I made ...

1:48 Gate Valve – Ver 3b