1:35

Switch View

Order Directly from Shapeways below Flat belt pulley. It measures 25.643 mm dia with a 7.938 mm width. In O scale this is a 48-1/2″ x 15″ pulley. The rim has the correct crown for this siz ...

Flat Belt Pulley
Order Directly from Shapeways below I found a drawing of a bridge shoe that looked like it would work for what I needed. (meaning it was simple enough). I found this is a book titled “Types and Deta ...

1:48 Boller & Hodge Bridge Shoe
Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

Double-Deck Bitt 2,94mm
Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

Double-Deck Bitt 5,87mm
Order Directly from Shapeways Below .. Electric motors. These scale out about 1/4″ dia so they are fairly large motors for smaller scales and small motors for larger scales .. the one with the a ...

Electric Motor
Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

Cowl Ventilators
Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

Double-Deck Bitt 19,6 mm
Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

Double-Deck Bitt 10,8mm
Order directly from Shapeways below — This represents welded pipe fittings and is designed to be used with Evergreen #226 tubing which is 4,8 mm OD / 0.187" and 3,3 mm / 0.131" ID. Wha ...

Welded Pipe Fittings – 90° elbows
Order directly from Shapeways below — To be honest this is a semi-generic design for a fire hydrant based upon the current 5 1/4″ American-Darling B-62-B-5. Introducted in 1962 (hence the ...

1:35 Fire Hydrant Model 1962 Ver1