1:43.5 O scale

Switch View
  • Order Directly from Shapeways below Flat belt pulley. It measures 25.643 mm dia with a 7.938 mm width. In O scale this is a 48-1/2″ x 15″ pulley. The rim has the correct crown for this siz ...

    Flat Belt Pulley

    Flat Belt Pulley

  • Order Directly from Shapeways below I found a drawing of a bridge shoe that looked like it would work for what I needed. (meaning it was simple enough). I found this is a book titled “Types and Deta ...

    1:48 Boller & Hodge Bridge Shoe

    1:48 Boller & Hodge Bridge Shoe

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 2,94mm

    Double-Deck Bitt 2,94mm

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 5,87mm

    Double-Deck Bitt 5,87mm

  • Order Directly from Shapeways below This is a set of bushings and insulators for use with my utility pole transformers Transformers: Electric Power Distribution System, Three-Phase and Single-Phase Tr ...

    O scale Utility Pole Set Ver 3

    O scale Utility Pole Set Ver 3

  • Order Directly from Shapeways Below .. Electric motors. These scale out about 1/4″ dia so they are fairly large motors for smaller scales and small motors for larger scales .. the one with the a ...

    Electric Motor

    Electric Motor

  • Order Directly from Shapeways Below: Hoist. Fits 1/4′ Evergreen IBeam. I made this for 1:48 but of course can be used in other scales. THIS IS IN BETA. UNTIL IT HAS BEEN PRINTED YOU ORDER AT YOU ...

    1:48 I-Beam Hoist

    1:48 I-Beam Hoist

  • Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

    O Scale Cowl Ventilators

    O Scale Cowl Ventilators

  • Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

    Cowl Ventilators

    Cowl Ventilators

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 19,6 mm

    Double-Deck Bitt 19,6 mm