1:48 American O scale

Switch View
  • Order Directly from Shapeways below These are 1:48 watertight doors for use on a ship. There are left and right hand hinged versions as well as with and without portholes.   ...

    1:48 Watertight Doors

    1:48 Watertight Doors

  • Order Directly from Shapeways below Flat belt pulley. It measures 25.643 mm dia with a 7.938 mm width. In O scale this is a 48-1/2″ x 15″ pulley. The rim has the correct crown for this siz ...

    Flat Belt Pulley

    Flat Belt Pulley

  • 90° and 45° elbows, couplings and Tees; gate valves. These all have a small stud to fit the ID of a piece of Evergreen #223 tubing. This tubing measures 0.093 in./2,4 mm OD and 0.039 in./0,99 mm ID. ...

    c.1:48 – 4″ Pipe Fittings

    c.1:48 – 4″ Pipe Fittings

  • Order Directly from Shapeways below I have created a topic in my forum to discuss this project – Ore Chute/Gate. Come on by and join the discussion   This is a project of my own .. I have h ...

    O Scale Ore Bin Chutes/Gates

    O Scale Ore Bin Chutes/Gates

  • These represent common 6″ pin insulators. They sit on a sprue shown in red. The idea is to cut the insulators off at the sprue. This exposes the 0.018″ hole in the center. The 0.018″ ...

    O 6in Pin Insulators 100ea

    O 6in Pin Insulators 100ea

  • Order Directly from Shapeways below: O – 1:48 Liquor bottles. There are eight different bottles. These have been printed – but they are at the very limits of the printers. If you bite the ...

    O scale Liquor Bottles

    O scale Liquor Bottles

  • Order Directly from Shapeways below Point Guard for Peco On30 switches – 5ea Left Hand and 5ea Right Hand switches: Acts as both a maintenance and safety accessory. On the maintenance side they ...

    1:48 Welch-Wise Peco Point Guard-v3

    1:48 Welch-Wise Peco Point Guard-v3

  • Order Directly from Shapeways below I found a drawing of a bridge shoe that looked like it would work for what I needed. (meaning it was simple enough). I found this is a book titled “Types and Deta ...

    1:48 Boller & Hodge Bridge Shoe

    1:48 Boller & Hodge Bridge Shoe

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 2,94mm

    Double-Deck Bitt 2,94mm

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 5,87mm

    Double-Deck Bitt 5,87mm