1:48 American O scale

Switch View
  • These are the four flywheels I test printed. The two smallest have been painted.n (clink on the diagram from a larger version) Steam era flywheel. This is my smallest flywheel and measures 46.6mm dia ...

    Steam Era Flywheels

    Steam Era Flywheels

  • Order Directly from Shapeways below These were used to protect the bricks around the opening in the coke oven from the tools of the operators (I am guessing here)   ...

    1:48 Iron Frame for Coke Oven

    1:48 Iron Frame for Coke Oven

  • Order direct from Shapeways below — I scratchbuilt and then 3D printed 6″ Gate Valves for my Pump House. I go into excruciating detail in 6 inch Gate Valve – in that I said – “I made ...

    1:48 Gate Valve – Ver 3b

    1:48 Gate Valve – Ver 3b

  • Order directly from Shapeways below — I call these beer bottle crates but that can be soda bottles too .. actually anything about that size. I used a RJ Rockers ‘Bell Ringer’ beer fo ...

    1:48 Wooden 24 Bottle Crate

    1:48 Wooden 24 Bottle Crate

  • Order directly from Shapeways below — Crates: I call these beer bottle crates but that can be soda bottles too .. actually anything about that size. I used Europe Standard beer bottles which are ...

    1:48 24 bottle Crates and Bottles

    1:48 24 bottle Crates and Bottles

  • Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

    O Scale Cowl Ventilators

    O Scale Cowl Ventilators

  • Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

    Cowl Ventilators

    Cowl Ventilators

  • Order Directly from Shapeways below – Utility Pole Transformers: These can be modeled as either Single-Phase or Three-Phase depending on the arrangement of the High-Voltage Bushings and how the ...

    O Utility Pole Transformer

    O Utility Pole Transformer

  • This is a test upload for pipe fittings etc. for a Rusty Stumps Backwoods Water tank kit. Walt Gillespie can no longer source the white metal castings that he used in the past so this is an attempt to ...

    Backwoods Water Tank Pipe Parts

    Backwoods Water Tank Pipe Parts

  • Order directly from Shapeways below — This is a rowboat following a pattern of one I found online = “The Denny” .. but I have only used it as a pattern .. the mesh is completely mine ...

    O scale Rowboat

    O scale Rowboat