1:87 HO scale

Switch View
  • This is a test upload for pipe fittings etc. for a Rusty Stumps Backwoods Water tank kit. Walt Gillespie can no longer source the white metal castings that he used in the past so this is an attempt to ...

    Backwoods Water Tank Pipe Parts

    Backwoods Water Tank Pipe Parts

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 19,6 mm

    Double-Deck Bitt 19,6 mm

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 10,8mm

    Double-Deck Bitt 10,8mm

  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:87 Corrugated Sheet Die – Ver3

    1:87 Corrugated Sheet Die – Ver3

  • Order directly from Shapeways below — The following was taken from www.collectorsweekly.com : Prior to our disposable metal, paper and plastic oil containers you would purchase oil at a gas stat ...

    1:87 Quart Oil Bottles & Racks

    1:87 Quart Oil Bottles & Racks

  • Order from Shapeways below — These Bollards measure 8,8mm/.346″/30″ FS (full size) along the base. From the bottom of the base to the top is 5,9mm/.232″/20″ FS and the di ...

    1:87 30″ Bollard – Ver 2

    1:87 30″ Bollard – Ver 2

  • Order Directly from Shapeways below – Utility Pole Transformers: These can be modeled as either Single-Phase or Three-Phase depending on the arrangement of the High-Voltage Bushings and how the ...

    HO Utility Pole Transformer

    HO Utility Pole Transformer

  • Order Directly from Shapeways below Tony Burgess asked me if I could do Beer/Soda bottles in HO scale. My feeling was .. yes .. just not sure how well they will print as these would be SMALL!! I went ...

    1:87 Bottles – Ver 5

    1:87 Bottles – Ver 5