Sale! 62%
 

Converters – Square to Round

$0.25

    Selecting Attributes:>

  • Tube A (Square) – Evergreen Square Tubing
  • Tube B (Round) – Evergreen Round Tubing
Clear

Modeling Scales

Please check the scales you model

SKU: N/A Categories: , ,
 

Description

Evergreen Tubing – Square & Round

These ‘Square to Round’ Converters are used to connect Evergreen Square tubing to Evergreen Round tubing.

There are 5 square tubing sizes from .125″ #252 to .375″ #256 and 12 round tubing sizes from .093″ #223 to .500″ #236.

I assigned my own Letter Code for each from D to H and from J to X and to make it simpler to refer to the Converters.

Additional information

Weight N/A
Dimensions N/A
Tube A (Square)

D – 1/8" ~ 3,2mm #252, E – 3/16" ~ 4,8mm #253, F – 1/4" ~ 6,3mm #254, G – 5/16" ~ 7,9mm #255, H – 3/8" ~ 9,5mm #256

Tube B (Round)

J – 3/32" ~ 2,4mm #223, K – 1/8" ~ 3,2mm #224, M – 5/32" ~ 4,0mm #225, N – 3/16" ~ 4,8mm #226, P – 7/32" ~ 5,5mm #227, Q – 1/4" ~ 6,3mm #228, R – 9/32" ~ 7,1mm #229, S – 5/16" ~ 7,9 #230, T – 11/32" ~ 8,7 #231, V – 3/8" ~ 9,5mm #232, W – 7/16" ~ 11,1 #234, X – 1/2" ~ 12,7mm #236

Evergreen Tubing Info

These fittings are made to use Evergreen tubing to create ductwork. There is no scale as such – you simply need to select the size tubing that will best represent the ducting you are modeling in your scale.

Note: The sizes shown for the tubing is ‘nominal’. While this does not matter for the OD, it does for the ID. The tubing I believe is produced much like a pasta extruder ,, through a die so the ID can vary by a few thousands of an inch. If the fitting does not slide easily into the tube you will need to either use an emery board to swipe the end of the fitting or use an appropriate size drill bit to ream out the round tube to make the fitting fit. Mostly this is not needed and the fitting will fit to the tube easily.

 

Reviews

There are no reviews yet.

Be the first to review “Converters – Square to Round”

Your email address will not be published.